TCF-90-S-ST, M. DB9F, 15KV ESD TCF-90-S-ST

Moxa TCF-90-S-ST. Dimensions (WxDxH): 42 x 80 x 22 mm. Input voltage: 12 - 48, Power consumption: 20 mA. Certification: CE FCC


2 viikkoa tilauspäivästä

Lisää tietoa tuotteesta

Port-powered RS-232 to optical fiber media converters.
The TCF-90 is a compact media converter that transmits RS-232 signals over optical fiber. Power is derived from either the serial port or an external power source. The TCF-90 extends RS-232 transmission up to 5 km with multi-mode fiber, or up to 40 km with single-mode fiber. A pair of TCF-90 converters can be used to connect two RS-232 devices with optical fiber in full duplex mode. The optical fiber isolates the data signals from dangerous increases in ground potential, ground loops, and electrical EMI/RFI noise, and enhances data security by eliminating the harmful effects of RF radiation and susceptibility to electromagnetic radiation.

Self-powered RS-232 to Optical Fiber
Connecting RS-232 devices to the TCF-90 is easy. The ST-type optical fiber connector is designed especially for data communication applications that transmit data either between or within buildings. The TCF-90 can be used for industrial applications and for applications that require secure data transfer.
The RS-232 port on the TCF-90 uses a DB9 female socket to connect directly to the host PC, with power drawn from the TxD, RTS, and DTR lines. Although the TCF-90 can obtain enough power from the three data/handshake lines whether the signal is high or low, we strongly recommend setting either the RTS or DTR signal to ON.

Patented LED Port Power Indicator
It's easy enough to use a multimeter to test if the serial device is supplying the TCF-90 with enough power through the serial connection, but why bother when the TCF-90 can do the testing for you? Connect the TCF-90 to the device's RS-232 port and set the SW4 switch to Test mode. If the patented port power LED indicator lights up, the TCF-90 is receiving enough power. If the LED does NOT light up, you will need to attach an external power source to the TCF-90.

Optional External Power Source
In most circumstances, the TCF-90 should be able to operate without using an external power source. However, an external USB power cord or DC power supply can be used in situations where the handshake lines are not available, both the RTS/DTR signals are set to OFF, or the attached device's serial interface chip provides less power than required.

*The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.
Tekniset tiedot
Isäntäkoneen käyttöliittymäRS-232
UlostuloliitäntäFiber (ST)
Valokaapelin liitinST
Lähetysetäisyys (single-moodi)40 km
Aallonpituus1310 nm
RX-herkkyys-24 dB
TX-lähtö-5 dB
Siirtonopeus0.05 Kbit/s
Käyttölämpötila0 - 60 °C
Varastointilämpötila-20 - 75 °C
Suhteellinen kosteusalue5 - 95%
Paino ja mitat
Mitat (LxSxK)42 x 80 x 22 mm
Tulojännite12 - 48
Virrankulutus20 mA
Takuu2 v
*The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.




Lisää suosikkeihin
Poista listalta
Viimeksi katsotut
Kirjautunut käyttäjä on vieraillut sivulla
Suosikki tuote
Tämä tuote on suosikeissasi
Ilmoita minulle
Saat sähköpostin <br/> kun tämä tuote <br/> on saatavissa.
Hyvitys perustuu normaalihintoihin ja on vähennetty listahinnasta.